How do you configure DHCP?

 The following is the dhcpd.conf file

ddns-update-style interim
ignore client-updates

subnet 192.168.1.0 netmask 255.255.255.0 {

# The range of IP addresses the server
# will issue to DHCP enabled PC clients
# booting up on the network

range 192.168.1.201 192.168.1.220;

# Set the amount of time in seconds that
# a client may keep the IP address
default-lease-time 86400;
max-lease-time 86400;

# Set the default gateway to be used by
# the PC clients

option routers 192.168.1.1;
# Don't forward DHCP requests from this
# NIC interface to any other NIC
# interfaces

option ip-forwarding off;

# Set the broadcast address and subnet mask
# to be used by the DHCP clients

option broadcast-address 192.168.1.255;
option subnet-mask 255.255.255.0;

# Set the NTP server to be used by the
# DHCP clients
option ntp-servers 192.168.1.100;
# Set the DNS server to be used by the
# DHCP clients
option domain-name-servers 192.168.1.100;

# If you specify a WINS server for your Windows clients,

# you need to include the following option in the dhcpd.conf file:
option netbios-name-servers 192.168.1.100;

# You can also assign specific IP addresses based on the clients'
# ethernet MAC address as follows (Host's name is "laser-printer":

host laser-printer {
hardware ethernet 08:00:2b:4c:59:23;
fixed-address 192.168.1.222;
}
}
#
#List an unused interface here
#
subnet 192.168.2.0 netmask 255.255.255.0 {
}